Intersig is the spacers specialist! For over 30 years now, we have been producing spacers in different shapes in our plant in Dendermonde and in the last few years we have invested a lot of time and money in state-of-the-art machinery specifically for this department. The result of all of these efforts can be found in the following products:
Type A: triangular spacers- A Heavy Duty
The heavy version of our triangular spacers, DBV-certified
From height 50mm to 400mm, in steps of 10mm
Height
(mm)Width
(mm)Sub-packaging
(pieces)Commercial
packaging (pieces)Length
(m)From 50 to 200 75 25 250 2 From 210 to 300 85 10 100 2 From 310 to 400 90 50 50 2 - A Regular
The regular version of our triangular spacers
From height 50mm to 200mm, in steps of 10mm
Height
(mm)Width
(mm)Sub-packaging
(pieces)Commercial packaging (pieces) Length
(mm)From 50 to 70 55 25 250 2 From 80 to 150 70 25 250 2 From 160 to 200 75 25 250 2
- ZZ Heavy Duty
The heavy version of our snake spacers, DBV-certified
From height 50mm to 400mm, in steps of 10mm or 20mm (from heigth 160mm)
Height
(mm)Sub-packaging
(pieces)Commercial packaging (pieces) Length
(m)From 20 to 40 25 3600 2 From 50 to 70 25 2400 2 From 80 to 100 25 2000 2 From 110 to 130 25 1600 2 From 140 to 180 25 1200 2 From 200 to 240 25 800 2 260 25 600 2 From 280 to 300 25 450 2 From 320 to 400 25 300 2 - ZZ Regular
The regular version of our snake spacers
From height 50mm to 200mm, in steps of 10mm or 20mm (from heigth 160mm)
Height
(mm)Sub-packaging
(pieces)Commercial
packaging (pieces)Length
(m)From 20 to 40 25 3600 2 From 50 to 70 25 2400 2 From 80 to 100 25 2000 2 From 110 to 130 25 1600 2 From 140 to 180 25 1200 2 200 25 800 2
- N Regular
The regular version of our N-spacers
From height 50mm to 200mm, in steps of 10mm or 20mm (from heigth 160mm)
Height
(mm)Sub-packaging
(pieces)Commercial
packaging (pieces)Length
(m)From 20 to 40 25 3600 2 From 50 to 70 25 2400 2 From 80 to 100 25 2000 2 From 110 to 130 25 1600 2 From 140 to 180 25 1200 2 200 25 800 2
Our brickwork reinforcement or Sigmafor is produced with galvanised wire (hot dipped galvanized with 60gr/m² of zinc) and is intended to prevent cracks and improve the resistance of the wall construction.
- Sigmafor Round
Round Sigmafor is used for regular masonry with thick mortar joints.
Width
(mm)Sub-packaging
(pieces)Commercial packaging (pieces) Length
(m)50 20 600 3,05 80 20 600 3,05 100 20 600 3,05 150 20 400 3,05 200 20 200 3,05 - Sigmafor Flat
Flat Sigmafor is used for masonry with thin (glued) joints (aerated concrete blocks).
Width
(mm)Sub-packaging
(pieces)Commercial packaging (pieces) Length
(m)40 20 600 3,05 90 20 600 3,05 140 20 400 3,05 190 20 200 3,05 - Sigmafor Round Epoxy
Round Sigmafor with an epoxy coating is used for regular masonry with thick mortar joints that may be exposed to moisture and water (e.g. exterior walls).
Width
(mm)Sub-packaging
(pieces)Commercial packaging (pieces) Length
(m)50 20 100 3,05 - Sigmafor Flat Expoxy
Flat Sigmafor with an epoxy coating is used for masonry with thin (glued) joints (aerated concrete blocks) that may be exposed to moisture and water (e.g. exterior walls).
Width
(mm)Sub-packaging
(pieces)Commercial packaging (pieces) Length
(m)40 20 100 3,05 - Sigmafor Round Heavy Duty
Sigmafor Round Heavy Duty is produced with thicker wires and is used in earthquake-proneareas.
Width (mm) Sub-packaging
(pieces)Commercial packaging (pieces) Length
(m)50 20 480 3,05 80 20 480 3,05 100 20 480 3,05 150 20 320 3,05 200 20 160 3,05 250 20 160 3,05 300 20 160 3,05 - Sigmafor Angle
Sigmafor angles are used in combination with round and flat sigmafor in order to create angles and T-joints.